Tube-Mills

ITL manufactures Tube Mills in many sizes to suit customers’ requirement from simple-manual type to sophisticated & automatic type based on technical -how from our German collaborators.

Tube-Mill from ITL has flexibility, needed for producing pipes and tubes in different sizes and gauges. Mill design and construction features are based on primary Product Mix. Also Design and Composition of various sub-assemblies are made and supplied according to customers’ need.

Uncoiler

·  Range of strip width-25mm to 1200mm

·  Coil weight- upto 10 Tonnes

·  Types: Single pay off, Double Pay off, Mandrel Type, Cone Type or Box Type. Manual/Pneumatic/Hydraulic operation.

Shear and Welder

·  Main purpose of Shear and Welder is to feed the mill with coils uninterrupted.

·  Models: Hand operated/Semi automatic/Completely automatic.

Looping Equipment

·  Types: Cage Accumulator, Overhead or underground looper or Continuous Strip Flood Accumulator (Horizontal), Vertical Strip Accumulator

Horizontal & Idler Stands

·  Graded Cast duly stress relieved, shafts of alloy steel. Roller changing facility is by removing front stand (upto 4″ sizes) and from top (for other sizes). Additional features like raising top rollers simultaneously, adjustment of roll centers while running, cassettes for quick roll changing, can be provided.

Welding Roll Assembly

·  ITL offers special welding roll assembly depending on weld requirement and pipe size.

·  Types: Two Roll system, Three Roll system, Four Roll and Five Roll system.

Bead Trimer & Bead Winder

·  A double tool type bead trimmer is provided to remove the extra weld metal on the pipe. Raising and lowering of tool is fully automatic strictly controlled by micro screw for tool adjustment.

·  Oscilating type Bead Trimers are also available.

Turk Head/Straightening

·  ITL has variety of design to offer for straightener or turk head operations.

·  Types: Straightner: Four Roll/Seven Roll Type

·  Turk heads: Four Roll/Eight Roll Type.

·  Special Type: Turk heads: For making square/rectangular or other shaped and profile pipes is also available.

·  Additional features: Like adjustment of rollers in all planes etc. can also be provided.

Cut off Saw

·  Models: Manual to Automatic, simple to most sophisticated type with a provision of controlling length accurately.

·  For MS Tubes: Flying cut off saw, Rotary disc type with three or six discs.

·  For SS Tubes: Specially designed cut off Machines are also available.

Ejector and Conveyor

·  The run out table with rollers, ejects tubes on one side or both sides, operated automatically.

Tube Straightening Machine (6/10 Rolls Type)

Tube and Pipe Mills Manufacturers Equipment
Tube and Pipe Mills Manufacturers Equipment

MODEL – TSM – 2

ITL Industries Limited is a highly respected name in the manufacturing of special purpose tooling machines for over a decade. Increased number of satisfied customers and an obsession for excellence and quality, put ITL in the fore front of Engineering Industry Scene.

Reasons for choosing ITL’s Tube Straightening Machine

1.    Fully stress relieved fabricated frame.

2.    Work rolls manufactured in HCHCr Steel through hardened for longer roll life.

3.    Rolls mounted in antifriction spherical roller bearings.

4.    Entire roll adjustment mechanism independent of all other components.

5.    All gears manufactured from alloy steel and are hardened.

6.    All gear shafts mounted in bearings.

7.    Universal propeller shaft driven.

8.    Easy to read dial type indicators.

9.    Simple initial machine setting.

10.  Specific design applications to suit your requirement.

Multi-Cross Roll Tube Straightening – The Proven Technology.

Today buyers and users of tubes in varied industries across the world demand a great degree of straightness and roundness in tubes, both for precision bore and nominal bore. This need along with the need for higher productivity, leads to the multi-cross roll method of straightening.

The multi-cross roll Tube Straightening Machine is based on the rotary principle of straightening, which gives very high degree of straightness with minimum amount of marking on both the inside and outside of the tube. This multi-cross roll arrangement allows the tube to be rounded during straightening and allows the skin hardness to be imparted to the tube. The degree of hardness can be controlled by the amount of pressure applied.

Reasons for choosing ITL’s Tube Straightening Machine

1.    Fully stress relieved fabricated frame.

2.    Work rolls manufactured in HCHCr Steel through hardened for longer roll life.

3.    Rolls mounted in antifriction spherical roller bearings.

4.    Entire roll adjustment mechanism independent of all other components.

5.    All gears manufactured from alloy steel and are hardened.

6.    All gear shafts mounted in bearings.

7.    Universal propeller shaft driven.

8.    Easy to read dial type indicators.

9.    Simple initial machine setting.

10.  Specific design applications to suit your requirement.

Multi-Cross Roll Tube Straightening – The Proven Technology.

Today buyers and users of tubes in varied industries across the world demand a great degree of straightness and roundness in tubes, both for precision bore and nominal bore. This need along with the need for higher productivity, leads to the multi-cross roll method of straightening.

The multi-cross roll Tube Straightening Machine is based on the rotary principle of straightening, which gives very high degree of straightness with minimum amount of marking on both the inside and outside of the tube. This multi-cross roll arrangement allows the tube to be rounded during straightening and allows the skin hardness to be imparted to the tube. The degree of hardness can be controlled by the amount of pressure applied.